turck TBPN-L1-FDIO1-2IOL - 7 Configuring with Turck Safety Configurator; Installing the Software; Integrate Turck Safety Configurator in Tia;Step7

41
V01.00| 2017/04

TBPN-L1-FDIO1-2IOL- Safe I/O channels
7 Configuring with Turck Safety Configurator
7.1 Downloading the software
h Download the Turck Safety Configurator from the Turck homepage here:
http://www.turck.de.
7.2 Installing the software
h Unpack the downloaded ZIP archive and start the installation via "install.exe".
¬ The setup assistant leads through the
installation.
7.3 Integrate Turck Safety Configurator in TIA/Step7
The Turck Safety Configurator can be started directly out of TIA-Portal/Step7 software.
h Select the option "register in TIA/Step7" in
the installation step "Custom Setup".
Fig. 17: Register the TSC in TIA/Step7
Start the Turck Safety Configurator from TIA/Step 7
NOTE
The Turck Safety Configurator online help contains a detailed program description.
NOTE
Please observe during the installation of Turck Safety Configurator, that the interface for
TIA-Portal/Step7 is installed with the software, see Integration of Turck Safety Configura-
tor in TIA/Step7, see
Integrate Turck Safety Configurator in TIA/Step7 (page 41).