turck TBPN-L1-FDIO1-2IOL - Subindex 66: Set Default Parameterization; Subindex 67: Teach Mode

Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
36
5.2.2 Subindex 66: Set Default Parameterization
Structure of the reset command:
Byte 3 Byte 2 Byte 1 Byte 0
0xEF 0xBE 0xAD 0xDE
5.2.3 Subindex 67: Teach Mode
Structure of the Teach command:
Byte 0
0x00 Teaching all O-Link ports
0x01 Teaching of IO-Link port 1
0x02 Teaching of IO-Link port 2
0x03 to 0xFF reserved
Entity_
Port
IO-Link
subindex
Read
Write
Length Description
0 66 w 4 byte Writing this object sets the IO-Link master
b
ack to factory settings. Any parameter set-
ting and configuration is overwritten. The data
storage buffer is deleted as well.
Entity_
Port
IO-Link
subindex
Read
Write
Length Description
0 67 w 1 byte The master reads all data (device-Id, vendor-
ID, serial
number, etc.) from the connected
device and saves them. All all previously saved
device data are overwritten.