Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
10
2.5.3 Process output data±DXP channels – Basic
2.6 Parameters
2.7 Diagnostics/status
2.7.1 LED displays
2.7.2 Diagnostic messages
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Channel status
n + 0 -
n + 1
-
DXP11
C5P2
DXP10
C5P4
DXP9
C4P2
DXP8
C4P4
Parameter name Value Description
Manual output reset
at overcurrent (SROx)
0 = no A The output switches on automatically after an
overload.
1 = yes The output is manually switched-off and on again.
Activate output
(EN DOx)
0 = no
1 = yes
A
LED LED
GREEN
LED
RED
Meaning Remedy
C4 and C5
(DXP)
Channel is
input
Channel is
output
off off inactive inactive
on off active active
on blink-
ing
Input active
and overload of
the supply volt-
age
-
off blink-
ing
Input inactive
and overload of
the supply volt-
age
Overload of
power supply
Check the sensor supply Both
LEDs at the connector are
flashing
off on - Overload
Diagnostics Description
VERRV1
Cxy
Overcurrent supply VAUX1 at Channel xy
SCOx Overcurrent output
Overcurrent at the respective output
To Next Page
Loading...
