9
V01.00| 2017/04
TBPN-L1-FDIO1-2IOL- Standard DXP-Kanäle
Process output data – complete module
2.5.2 Process input data – DXP channels – Basic
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
n to
n + 1
Universal I/O channels
and
IO-Link master channels
2 - 9 Safe I/O channels
10 - 73 IO-Link process output data
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Channel status
n -
n + 1 see Part 3,
Process input data – IO-Link master chan-
nels
DXP11
FBI1-3
C5P2
DXP10
FBI1-2
C5P4
DXP9
FBI1-1
C4P2
DXP8 FBI
1-0
C4P4
… reserved
DXP diagnostics
Overcurrent diagnostics sensor supply
n + 88
-
VERRV1
C1213
VERRV1
C1011
-
n + 89 -
Overcurrent diagnostics outputs
n + 90 -
n + 91 - SCO11 SCO10 SCO9 SCO8
… -
Process input
data
Value Description
DXPx
FBI1.x
CxPy
These input bits of the DXP channels are mapped into the device's
PROFIsafe output data and are provided as fieldbus bits (1-0, 1-1, 1-2 and
1-3) in the Turck Safety Configurator.
0 Input active
1 Input active
VERRV1
Kxy
Overcurrent supply VAUX1 at Channel xy
SCOx Overcurrent output
Overcurrent at the respective output
To Next Page
Loading...
