turck TBPN-L1-FDIO1-2IOL - Process Input Data - Universal Standard I;Os

73
V01.00| 2017/04

TBPN-L1-FDIO1-2IOL- Safe I/O channels
8.4.3 Process input data - Universal standard I/Os
A detailed description of the process data for the universal standard I/Os can be found in the sepa-
rate user manual:
 Part 2 "User manual – TBPN-L1-FDIO1-2IOL – Standard I/Os".
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Basic n
-
Status DXP channels
n + 1 see Part 3,
Start-up problems – frequently failure
causes
DXP11
FBI1-3
C5P2
DXP10
FBI1-2
C5P4
DXP9
FBI1-1
C4P2
DXP8
FBI 1-0
C4P4
… -
Diagnos-
tics
n + +88
-
Overcurrent sensor
supply (
DXP)
-
n + 89
-
n + 90
n + 91
-
Overcurrent at output for
DXP11 - DXP 8
… -
Process input
data
Description
DXPx 
FBI1-x
CxPy
These input bits of the DXP channels are mapp
ed into the device's PROFIsafe output
data and are provided as fieldbus bits (1-0, 1-1, 1-2 and 1-3) in the Turck Safety Config-
urator.
Fig. 46: Assignment of the standard inputs in the Turck Safety Configurator