Address setting
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
38
5.2 Address setting in PROFINET
In the delivery state or after a device reset to factory settings, neither a device name nor an IP
address is set in the device.
5.2.1 PROFINET name
In PROFINET, the connected device is not identified by it’s IP address, but recognized and addressed
by it’s device name.
The device name can be freely chosen.
Default device name (from GSDML): tben-l1-fdio1-2iol
5.3 IP address
The devices IP address is usually set through the PROFINET controller.
In the delivery state, the device can be accessed via the IP address
192.168.1.254.
If the PC used for the configuration is part of the same IP network, the page
http://192.168.1.254/info.html
can be opened in order to initially change some settings.
To Next Page
Loading...
