turck TBPN-L1-FDIO1-2IOL - Switch on Non-Safety Channels Permanently (1. and 2. OSSD)

57
V01.00| 2017/04

TBPN-L1-FDIO1-2IOL- Safe I/O channels
7.12.3 Switch on non-safety channels permanently (1. and 2. OSSD)
The non-safety channels at C4 - C7 of the device can be safe switched off via the internal safety out-
puts FSO0 and FSO1. If they have to
be switched on permanently, then FSO0 and FSO1 need a per-
manent switch-on condition (TRUE). The programming is done in the 1. and 2. OSSD.
h Delete the element "output F-CPU" in both OSSDs (
1. and 2. OSSD) and replace it by a TRUE-ele-
ment from the device library.
¬ Both internal outputs are perma
nently active.
Fig. 37: Permanent activation of FSO0 and FSO1.