turck TBPN-L1-FDIO1-2IOL - Licensing the Software; Software Incensing for Virtual Machines (VM); Starting the Software

Configuring with Turck Safety Configurator
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
42
Open Turck Safety Configurator using the function "Start Device Tool..." in TIA-Portal.
Fig. 18: Start the Turck Safety Configurator from TIA/Step7
7.4 Licensing the software
The licensing is done via Coupon code.
h Enter the coupon code on the
Turck Homepage following this link:
http://www.turck.de/en/tu
rck-safety-configurator-license-6174.php.
h If the coupon code is missing, please order a coupon code via e-mail under the following E-mail
add
ress:
TM-BWSoftwareSupport@turck.com
7.4.1 Software incensing for virtual machines (VM)
h Enter the coupon code on the Turck Homepage following this link:
http://www.turck.de/en/tu
rck-safety-configurator-license-vm-6177.php.
h If the coupon code is missing, please order a coupon code via e-mail under the following E-mail
add
ress:
TM-BWSoftwareSupport@turck.com
7.5 Starting the software
h Start the software via the program icon on the desktop.
¬ The Turck Safety Configurator starts with the Sta
rt Assistant, which will lead through the first
steps after program start.