turck TBPN-L1-FDIO1-2IOL - Switch off FDX6;7 at C3 (4. OSSD), if Output FDX4;5 Is Switched

Configuring with Turck Safety Configurator
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
60
7.12.5 Switch off FDX6/7 at C3 (4. OSSD), if output FDX4/5 is switched.
Output FDX6/7 has to switch off if output FDX4/5 (3. OSSD) switches off.
h Delete "Output F-CPU" in the release circuit  (. OSSD).
h Select the block "State of output sw
itching element" from the Device library and place it at the
function input. In the dialog box "State of output switching element x" select OSSD 3.
Fig. 40: State of output switching element OSSD 3 in OSSD 4
¬ The state of 3. OSSD controls the output FDX6/7 in 4. OSSD.