Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
2
3.6.1 Safety characteristic data 19
3.6.2 General technical data 19
3.6.3 Technical data – safety inputs 21
3.6.4 Technical data – safety outputs 22
3.6.5 Derating curves 23
3.7 Safe I/O channels 23
3.7.1 Safe status 23
3.7.2 Fatal Error 23
3.7.3 Safety inputs (FDI) 24
3.7.4 Safety outputs (FDO) 26
3.8 Universal standard I/Os 27
3.9 IO-Link master channels 27
3.10 Configuration memory 27
3.10.1 Storing a configuration 27
3.10.2 Loading a configuration from the memory chip 28
3.10.3 Reset the device to factory settings (incl. deleting the memory chip) 28
3.10.4 Deleting the memory chip 29
3.10.5 Module behavior/configuration transfer 30
4 Mounting and connecting 31
4.1 Mounting 31
4.1.1 Mounting material 31
4.1.2 Mounting the device 31
4.2 Grounding/shielding concept 32
4.2.1 Grounding the device (FE) 33
4.3 Connection 34
4.3.1 24 V supply (PELV) 34
4.3.2 Connect the supply voltage 7/8" 34
4.3.3 Connect the M12 connectors 35
4.3.4 Assure protection class (IP67/IP69K) 36
5 Address setting 37
5.1 F-address assignment 37
5.2 Address setting in PROFINET 38
5.2.1 PROFINET name 38
5.3 IP address 38
6 Commissioning the device 39
6.1 Initial commissioning 39
6.1.1 Mounting/electrical installation 39
6.1.2 Configuring in Turck Safety Configurator 39
To Next Page
Loading...
