Configuring with Turck Safety Configurator
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
54
h Delete the release circuits (OSSDs) which are no longer used in the component manager (in this
example OSSD 3).
Fig. 33: Deleting OSSDs
7.12 Application example
Emergency stop at FDI0/1 at C0 (64. OSSD), page 7-55
Light grid (AOPD) at input FDI2/3 at C1 (63. OSSD), page 7-55
Non-safety channels at C4 - C7 will be switched on permanently via the internal safety outputs (1.
and 2. OSSD), page 7-57
Output FDX4/5 at C2 (3. OSSD) is switched off if the emergency stop and/or the light grid are acti-
vated, page 7-58
Output FDX6/7 at C3 (4. OSSD) is switched off, if output FDX4/5 is switched off,page 7-60. The
output state is transferred to the F-
CPU.
Release of the complete safety function via a release bit in the F-CPU (3. OSSD), page 7-61.
To Next Page
Loading...
