This menu lets you configure the display and key backlight.
Set Mode
Choose how you want the backlight to operate:
10 sec The scanner keeps the backlight on for 10 seconds after the last
operation.
30 sec The scanner keeps the backlight on for 30 seconds after the last
operation.
Squelch The scanner turns on the backlight when a signal breaks squelch.
Keypress The scanner turns on the backlight when you press a key.
Infinite The scanner leaves the backlight on all the time.
Set Dimmer
Select the brightness of the backlight. Your options are high (brightest), middle, and low
(dimmest).
Set Color
Select the color of the backlight. Your options are blue, red, magenta, green, cyan,
yellow, and white.
Adjust Key Beep
Select the volume level (Level 1 through Level 15) you want the keybeep to use, or
select Auto to have the scanner sound the keybeep without changing the volume. If you
don't want the scanner to beep when you press the keys, select Off .
Battery Option
This menu lets you configure the advanced battery control features:
Set Battery Save
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/Settings.html (2 of 6)5/26/2009 11:16:37 AM
To Next Page
Loading...
