Uniden BCD396XT User Manual

NumberTags < UnidenMan4 < TWiki
3. Enter the number tag you want to use for the Close Call Hits system.
To a service search range :
1. Open the Search for... menu.
2. Select Edit Service, then select the service search range you want to assign the
number tag to.
3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this search range.
To a custom search range :
1. Open the Search for... menu.
2. Select Edit Custom, then select the custom search range you want to assign the
number tag to.
3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this custom search range.
Assigning a CHNT
● You can assign CHNTs to channels even if the system does not have an assigned
SNT. However, without an SNT, you can only navigate to these channels from
within that system itself.
● CHNTs can be duplicated within their own system, but you will see a warning
when you create multiples.
● CHNTs can range from 0 to 999 .
1. Open the Program System menu.
2. Select the system containing the channel you want to assign the number tag to.
3. Select Edit Group, then select the channel group you want.
4. Select Edit Channel, then select the channel you want to assign the number tag to.
5. Select Set Number Tag.
6. Enter the number tag you want to use for this channel.
Using Number Tags
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/NumberTags.html (2 of 3)5/26/2009 11:12:33 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm