Uniden BCD396XT - P25 Condition Mode; State Transition Diagram

Thursday, May 14, 2009
27
P25 Condition Mode
Press [Function] + [Scroll Control] key to go to P25 Condition mode in Volume / Squelch Adjust mode.
You can see the current status of APCO decoding and the threshold values in this mode.
P25 Condition
T 1. 25 1. 58 1. 80 indicates the threshold voltage. The specific values will be determined by your setup.
The number following ERR: indicates the APCO decoder error rate.
This number preceding AUTO shows threshold value.
Press [Scroll Control] key or [Function] + [Scroll Control] key to quit the P25 Condition Mode. This mode
doesn't have a time-out.
State Transition Diagram
Normal Mode
Volume Adjust
Squelch Adjust
P25 Condition
Push [F]+[Scroll Ctrl]
Push [Scroll Ctrl]
Push [F]+[Scroll Ctrl]
Push [F]+[Scroll Ctrl]
Push [Scroll Ctrl]
Push [F]+[Scroll Ctrl]
Push [Scroll Ctrl]
PRI 3. 87
System 1
25. 0000MHz
NFM P25
ERR: 14 8 AUTO
T 1. 25 1. 58 1. 80
Battery Voltage