Uniden BCD396XT - Key Operation During Band Scope Mode

194
Key Operation during Band Scope Mode
Normal Mode during Normal Screen
[Scroll Control] Knob
Sets the level in Volume / Squelch Level Control mode.
Turn this knob, the marker changes the frequency every step.
[Scan / srch] Key
Press this key to go to Scan Mode.
[Hold / ] Key
In Search or Max Hold Search Mode, press this key to go to Hold Mode.
In Hold Mode, press this key to return to the previous search mode.
[
.
/ no / pri] Key
Press this key to display a setting screen.
[E / yes / gps] Key
Press this key to register the marker frequency as the center frequency.
[Menu] Key
Press this key to enter the Menu Mode.
Normal Mode during Setting Screen
[Scroll Control] Knob
Sets the level in Volume / Squelch Level Control mode.
Turn this knob to change the selected item parameter except “CF” item.
[Scan / srch] Key
Press this key to go to Scan Mode.
[Hold / ] Key
In Search or Max Hold Search Mode, press this key to go to Hold Mode.
In Hold Mode, press this key to return to the previous search mode.
[
.
/ no / pri] Key
Press this key to select the next setting item.
[E / yes / gps] Key
When the “CF” item is selected, press this key to go to the edit menu for the center frequency.
[Menu] Key
Press this key to enter the Menu Mode.
Function Mode
[Scroll Control] Knob
Sets the level in Volume / Squelch Level Control mode.
Turn this knob, the marker changes the frequency every bar.