Uniden BCD396XT - Setting Alerts

SettingAlerts < UnidenMan4 < TWiki
Setting alerts
Your scanner can trigger alerts for several different events. The table below shows the
different alerts and how to program them:
To sound an alert when Follow these steps
A channel becomes active Edit the channel properties (Edit
Channel#Set Alert):
1. Go to the Program System menu
and select the system that contains
the channel you want set the alert
for.
2. Select Edit Group , then select the
group you want.
3. Select Edit Channel, then select the
channel you want to set the alert
for.
4. Select Set Alert .
5. Choose the Alert Tone and Alert
Light you want the scanner to use.
An active Talk Group on a system contains
an emergency flag
Edit the system properties (Edit Sys
Option#Emergency Alert):
1. Go to the Program System menu
and select the system you want set
the alert for.
2. Select Edit Sys Option, then select
Emergency Alert .
3. Choose the Alert Tone and Alert
Light you want the scanner to use.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/SettingAlerts.html (1 of 3)5/26/2009 11:12:37 AM