Reading the display
This page applies to the BCD996XT and BCD396XT. For other models,
see:
● BCT15X Reading the Display
● BC346XT Reading the Display
The display icons vary depending on the status of the scanner and what youre doing at
any given time. The diagram shows common icon locations, and table below lists the
most common icons and their meanings:
Attenuator icon Steady: The attenuator is turned on for the current
channel.
Blinking: The attenuator is turned on globally (for all
channels).
Battery level icon
(Handheld models only)
x.xx: The remaining battery voltage is displayed in
place of the Xs.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/CDImage_090515/Manual/ReadingTheDisplay.html (1 of 5)5/26/2009 11:12:26 AM
To Next Page
Loading...
