Uniden BCD396XT User Manual

Thursday, May 14, 2009
14
PC Control
You can download information into the scanner and control the scanner via your personal computer.
LCD and Keypad Backlight
You can select your desired LCD backlight color from White, Red, Magenta, Blue, Green, Cyan, or Yellow.
The Keypad backlight is single white.
The backlight can be adjusted to 3 different brightness levels
Alert Tone Level
This feature lets you adjust the volume level of the following tones: Key Beep, Emergency Alert, Channel
Alert, Close Call Alert, Tone-Out detection Alert, Battery Low Alert and Location Alert.
Battery Low Alert
When the battery voltage becomes low, the icon will blink and a Battery Low Tone will be generated
every 15 seconds. This alert level is set at the same level as the key beep volume level.
Battery Save
You can turn on/off this function by Menu Operation.
This works when there is no transmission over 1 minute in the following modes. This feature turns off RF
power for 1 second and turns on it 300 ms to extend the battery life.
 Scan Hold Mode at a Channel of conventional System (without Priority Scan)
 Any Search Hold Mode
Key Lock
This feature disables the keypad and scroll to prevent any accidental input.
Key Safe Mode
This mode helps keep novice users from accidentally changing parameters or modes.
Some keys don't work in this mode.
Audio AGC
The scanner judges strength of the signal and changes the volume automatically.
Repeater Reverse
One-touch key lets you switch to hearing the input frequency on a conventional repeater system or
trunked system.
Memory Backup
Scanner memory is backed up semi permanently.

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm