Create a channel in a group
Each trunked system can contain up to 500 channels in each group.
1. On the Edit Group menu, select the channel group you just created.
2. Go to the Edit Channel menu and select New Channel .
3. Input the Talk Group ID (TGID) for this channel.
4. If you need to change any of the channel properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Channel properties
All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property Option name
Required
TGID
Edit Talk Group ID
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Alert
Set Alert
Record
BCD996XT only:Set Record
Priority
Set Priority
Volume Offset
Volume Offset
Available operations
Copy a channel
Copy Channel
Delete a channel
Delete Channel
file:///C|/Documents%20and%20Settings/POpitz/My%20D...DImage_090515/Manual/StandardP25TrunkedSystems.html (6 of 7)5/26/2009 11:11:54 AM
To Next Page
Loading...
