Uniden BCD396XT User Manual

EditTalkGroupID < UnidenMan4 < TWiki
Edit Talk Group ID
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
All Talk Group IDs must be in the proper format for each system type.
● Motorola Type I Systems
● Motorola Type II Systems
● P25 Single Frequency Systems (BCD396XT and BCD996XT only) or Standard
System Trunk Site
● EDACS Wide or Narrow Systems
❍ AFS format
● I-Call channel (Motorola, P25 (BCD396XT and BCD996XT Only), or EDACS)
● LTR systems
Motorola Type I Systems
Enter the Talk Group ID in the following format:
BFFF-SS
● B = Block # (1 digit)
● F = Fleet # (2-3 digits)
● S = Sub-Fleet # (1-2 digits)
Press the decimal key to enter the hyphen.
(If you try to enter a hexadecimal TGID for a Type I system, the scanner
treats the entry as a decimal number.)
Motorola Type II Systems
● Decimal format: Enter the TGID in numbers only, up to 5 digits
● Hexadecimal format: up to 3 characters
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ents/temp/CDImage_090515/Manual/EditTalkGroupID.html (1 of 3)5/26/2009 11:14:58 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm