Uniden BCD396XT - Channels; Memory Architecture; Channel Memory Scan; Priority Scan

Thursday, May 14, 2009
9
Channels
Dynamic – You can create up to 25,000 total conventional channels, trunked channels, and trunked system
frequencies.
 Channels in a conventional system contain a frequency.
 Channels in a trunked system contain a talk group ID (TGID).
Memory Architecture
Absolute Limits:
Systems
500
Sites Total
1,000
Sites/System
256
Channel Groups per System
20
Channels+System Frequencies
25,000
Channels per conventional
system
1000
Channels per trunked system
500
Trunk Frequencies per Site
500-1000 (depending on total
TGIDs stored in the system)
Notes about limits:
 The actual results will be limited by the first absolute limit you hit. For example, if you
have created 1000 sites, you will not be able to create a new system even though you have
created fewer than 500 systems.
 You can check the % of memory used by using the menu.
Channel Memory Scan
The scanner can scan any combination of trunked and conventional systems simultaneously.
Priority Scan
The scanner checks conventional priority channels every 1-10 seconds (2 seconds default) when scanning a
conventional system.
Priority Plus Scan
The scanner scans only the conventional priority channels.
Search with Scan
The scanner can do Service and Custom Searches along with system scanning.
Scan Speed
100 Channels/Second (max) for conventional systems.