hold the button
Using the FUNCTION button
When you tap FUNCTION, the scanner remembers the FUNCTION + key combination
for the next 3 seconds; during this time, it displays an F icon at the top of the screen.
If you want the scanner to maintain the FUNCTION + key combination longer, press &
hold FUNCTION. The scanner remembers the FUNCTION + key combination until the
next time you tap FUNCTION; during this time, it displays Function Key Holding and
flashes the F icon at the top of the screen.
Key functions in different operation modes
The keys have different functions in each operation mode:
● Scan and Search mode key functions
● Hold mode key functions
● Close Call mode key functions
● Priority Scan mode information
● GPS mode key functions
● Tone Out mode key functions
● Band Scope mode key functions
● Available functions in Key Safe mode
Locking the Keypad
You can lock the keypad to prevent accidental interruptions of the scanner's current
operation.
● To lock the keypad, press FUNCTION + tap BACKLIGHT . The scanner
display shows Keypad Lock On and turns on the keypad lock icon in the upper
left corner.
● All keys are disabled except for HOLD , BACKLIGHT , and SELECT-
VOLUME-SQUELCH (Volume level only)
● To unlock the keypad, press FUNCTION + tap BACKLIGHT . The scanner
display shows Keypad Lock Off and turns off the keypad lock icon.
file:///C|/Documents%20and%20Settings/POpitz/My%20D...mp/CDImage_090515/Manual/KeysAndTheirFunctions.html (3 of 4)5/26/2009 11:13:48 AM
To Next Page
Loading...
