Uniden BCD396XT - Page 1006

HoldMode < UnidenMan4 < TWiki
Hold mode
This page applies only to the BCD396XT and BC346XT. For other models
see:
● BCD996XT Hold Mode
● BCT15X Hold Mode
Hold stops the scanner on the current channel or frequency. You can access these functions
by using the different key operations:
● Key operation in Hold mode
● Reading the displays in Hold mode
❍ Conventional system display
❍ Trunked system display
❍ Service search with scan hold display
Key operation in Hold mode
Key Name
(2nd
operation)
Action on:
Hold (Close
call)
1 (Search 1)
2 (Search 2)
3 (Search 3)
Tap Resume scan or
search.
Enter the number on the key
FUNCTION
+ Tap
Enter Close Call
mode.
Start the Quick Search assigned to this key
FUNCTION
+ Press &
hold
Enter Close Call
Only mode.
NA
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/HoldMode.html (1 of 7)5/26/2009 11:16:31 AM