Uniden BCD396XT - Page 896

BCD996XTHoldMode < UnidenMan4 < TWiki
Hold mode
This page applies only to the BCD996XT. For other models see:
● BCD396XT and BC346XT Hold Mode
● BCT15X Hold Mode
Hold mode lets you edit the current frequency, system, site, or channel. You can access these functions by
using the different key operations:
● Key Operation in Hold Mode
● Reading the displays in Hold mode
❍ Conventional system display
❍ Trunked system display
❍ Service search with scan hold display
Key Operation in Hold Mode
Key Name
(2nd
operation)
Action On
PRIORITY
1 (Search 1) 2 (Search 2) 3 (Search 3)
Tap Toggle priority
mode.
Enter the digit in Direct Entry.
FUNCTION
+ Tap
Toggle priority
mode.
Start the search range assigned to this Search Key.
Key Name
(2nd
operation)
Action on:
Weather
4 (IF exchange) 5 (Level offset) 6 (Display mode)
Tap Toggle Weather
Priority Mode
Enter the digit in Direct Entry.
FUNCTION
+ Tap
Toggle Weather
Priority Mode
Toggle the IF for that the
current frequency.
Change the volume
offset for the current
channel.
Change the display
mode.
file:///C|/Documents%20and%20Settings/POpitz/My%20...s/temp/CDImage_090515/Manual/BCD996XTHoldMode.html (1 of 7)5/26/2009 11:15:35 AM