Tap Temporary lockout the
current channel. If the
current channel is
temporarily or
permanently locked out,
unlock it.
Activate the FUNCTION mode for the next keypress.
Function + Tap Temporarily lockout the
current system. If the
current system is
temporarily or
permanently locked out,
unlock it.
NA
Double Tap Permanently lockout the
current channel.
NA
Function + Double
Tap
Permanently lockout the
current system.
NA
Press & Hold Unlock all channels in the
current system.
"Latch" the FUNCTION mode. Scanner stays on the
current system and all keypresses use the FUNCTION
mode until you tap the control again.
Function + Press &
Hold
Prompt to Unlock All
Systems (Y/N)? If you
press E/Yes the scanner
unlocks and enables all
systems, sites, and
searches.
NA
Reading the displays in Hold mode
The display information in Hold mode varies depending on the type of system the scanner is Holding on.
Conventional system display
When the scanner is holding on a conventional system, it displays the following screens:
file:///C|/Documents%20and%20Settings/POpitz/My%20...s/temp/CDImage_090515/Manual/BCD996XTHoldMode.html (4 of 7)5/26/2009 11:15:35 AM
To Next Page
Loading...
