Uniden BCD396XT User Manual

EditBandPlan < UnidenMan4 < TWiki
Edit Band Plan
(Motorola systems only) The scanner prompts you to choose one of the two standard
band plan types: 800/900 Standard or 800 Splinter. Choose Custom if you need to create
your own band plan.
● Creating a custom band plan
❍ Band plan number
❍ Set Base Freq
❍ Set Offset
❍ Set Spacing
❍ Rebanded Motorola Systems
Creating a custom band plan
You will need to create a custom band plan for a Motorola VHF, UHF, and 800 MHz
Rebanded system. When you select Custom , the scanner prompts you for the following
information:
Band plan number
Select one of the 6 available band plan numbers, from Band Plan 1 through Band Plan
6 .
Set Base Freq
1. Input the lower limit of the band frequency.
2. Input the upper limit of the band frequency.
(See Calculating upper base frequencies for more information.)
Set Offset
Enter the offset.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/EditBandPlan.html (1 of 3)5/26/2009 11:15:05 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm