Thursday, May 14, 2009
Display Formats of Each Information:
The advance direction: This is one of N, NE, E, SE, S, SW, W and NW.
The time: The time is displayed as "hh:mm" (hh: hour, mm: minute). If "12H" is
selected at Set Time Format, "A" or "P" is displayed at a right end.
The speed: This is a triple digits. According to the setting of Set Unit, "mph"
(mile/hour) or "kph" (km/hour) is displayed for a unit.
The elevation: This is displayed as "EEEE ft" (EEEE: elevation of a positive number) or "-
EEE ft" (EEE: elevation of a negative number) using four digits. According
to the setting of Set Unit, "ft" (feet) or "km" is displayed for a unit.
The direction for the POI: One of eight directions is shown. There are "", "", "", "", "", "",
"" and "". In Function Mode, this arrow changes to small one.
The distance for the POI: This is displayed as "DDDD.dd mi" (DDDD.dd: distance). According to the
setting of Set Unit, "mi" (mile) or "km" is displayed for a unit.
The ETA to the POI: This is displayed as "hhh mmm" (hh: hour, mm: minute).
The latitude: This is displayed as "N" or "S" and "DDºMM'SS.ss" (for DMS format) or
"DD.dddddd" (for DEG format).
The longitude: This is displayed as "W" or "E" and "DDDºMM'SS.ss" (for DMS format) or
"DDD.dddddd" (for DEG format).
Error Display
When the scanner does not receive GPS data, the scanner displays “No GPS Input”.
When the scanner is searching for the satellite, the scanner displays “Searching for Satellite”.
You can select a POI by turning [Scroll Control] knob even if the scanner displays an error message.
Location Alert Operation
This alerts you when you approach a destination, a Dangerous Xing or a Dangerous Road by ringing an
alert.
Location Alert System Types have “POI (Point Of Interest)”, “Xing (Dangerous Xing)” and “Road
(Dangerous Road) “.
No GPS I nput
HOME
SCAN ↑
Searchi ng
for Satelli te
HOME
SCAN ↑
To Next Page
Loading...
Need help?
General
Weight and Dimensions
