Uniden BCD396XT User Manual

SetFrequencies < UnidenMan4 < TWiki
● Temporary Lockout - The lockout will be cleared when you cycle power.
● Lockout - The lockout must be manually cleared.
● Unlocked - The scanner will use the frequency when monitoring the system.
Delete Frequency
Delete this frequency or channel and all associated settings.
New Frequency
Create a new frequency.
LTR and EDACS system options
When you're editing site frequencies within an LTR or EDACS wide or narrow system,
you have the following additional options:
LCN (Logical Channel Number)
When you enter a new frequency or edit an exisitng frequency, the scanner prompts you
enter a logical channel number (LCN). Enter a number from 1 through 20 for an LTR
system or a number from 1 through 30 for an EDACS wide or narrow system.
EDACS SCAT system options
When you're editing site frequencies within an EDACS SCAT system, you have the
following additional options:
Set Number Tag
Assign a number to this system or channel that you can use to tune directly to a specific
channel. Choose a number from 0 to 999. (For more information, see Number Tags.)
Volume Offset
The scanner can automatically adjust the volume when it tunes to this channel or
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/SetFrequencies.html (2 of 3)5/26/2009 11:14:49 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm