Uniden BCD396XT - Page 897

BCD996XTHoldMode < UnidenMan4 < TWiki
Press &
Hold
Go to Weather
Scan mode.
NA NA NA
Key Name
(2nd
operation)
Action on:
GPS
7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)
Tap Switch to the GPS
Navigation
display.
Enter the digit in Direct Entry.
FUNCTION
+ Tap
Switch to the GPS
Navigation
display.
Toggle the attenuator
state.
NA Change the
modulation.
FUNCTION
+ Press &
hold
NA Toggle the attenuator
state for all signals.
If on a channel that
has a valid reverse
(input) frequency,
show the repeater
reverse frequency for
the current frequency
(the scanner returns to
the original frequency
when you release the
key).
NA
Key Name
(2nd
operation)
Action on:
Menu
. / No (Decimal) 0 Yes (Enter)
Tap Enter the Menu
Mode.
If you've entered a
system number tag/
channel number
tag in Direct
Entry, go to the
specified system
and channel.
Enter a decimal point,
hyphen, or "i" for Direct
Entry.
Enter 0 in Direct
Entry.
Go to edit mode for
the current channel or,
if set to a trunked
system frequency go
go the edit mode for
the system.
file:///C|/Documents%20and%20Settings/POpitz/My%20...s/temp/CDImage_090515/Manual/BCD996XTHoldMode.html (2 of 7)5/26/2009 11:15:35 AM