Uniden BCD396XT User Manual

KeySafeMode < UnidenMan4 < TWiki
Key Safe Mode
This page applies only to the BCD396XT and BC346XT. For other models
see:
● BCD996XT Key Safe Mode
● BCT15X Key Safe Mode
Key Safe mode locks out the programming menu and more advanced functions so the user
can't accidently "break" the scanner. This mode is ideal for any situation where you want
another person to be able to use the scanner without changing any of the settings.
To turn Key Safe mode on (or off)
● Turn the scanner off.
● Press and hold FUNCTION while you turn the scanner back on.
● The scanner display shows Key Safe Mode On (or Key Safe Mode Off ), then returns
to the operation it was performing when you turned it off.
● While Key Safe mode is on, MENU is disabled along with the key combinations
described in the table below.
● When you try to use a disabled key combination, the scanner display shows Key
Safe Mode. Press FUNC while Power On for Full Operation .
The table below shows which key combinations are disabled and which ones operate
normally (depending on the operating mode the scanner is in):
Key Name
(2nd
operation)
Action on:
Hold (Close
call)
1 (Search 1)
2 (Search 2)
3 (Search 3)
Tap Normal operation
Press & hold Normal operation
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/KeySafeMode.html (1 of 4)5/26/2009 11:16:33 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm