Uniden BCD396XT User Manual

BCT15XKeySafeMode < UnidenMan4 < TWiki
Key Safe Mode
This page applies only to the BCT15X. For other models see:
● BCD396XT and BC346XT Key Safe Mode
● BCD996XT Key Safe Mode
Key Safe mode locks out the programming menu and more advanced functions so the user can't accidently
"break" the scanner. This mode is ideal for any situation where you want another person to be able to use the
scanner without changing any of the settings.
To turn Key Safe mode on (or off)
● Turn the scanner off.
● Press and hold FUNCTION while you turn the scanner back on.
● The scanner display shows Key Safe Mode On (or Key Safe Mode Off ), then returns to the operation it
was performing when you turned it off.
● While Key Safe mode is on, MENU is disabled along with the key combinations described in the table
below.
● When you try to use a disabled key combination, the scanner display shows Key Safe Mode. Press
FUNC while Power On for Full Operation .
The table below shows which key combinations are disabled and which ones operate normally (depending on
the operating mode the scanner is in):
Key Name
(2nd
operation)
Action On
DOT / Police /
PRIORITY
1 (Search 1) 2 (Search 2) 3 (Search 3)
Tap Normal Operation
FUNCTION
+ Tap while
holding
Scan mode:
Normal Operation
Other modes:
Disabled
Disabled
FUNCTION
+ Tap while
scanning
Scan mode:
Normal Operation
Other modes:
Disabled
Normal Operation
file:///C|/Documents%20and%20Settings/POpitz/My%20.../temp/CDImage_090515/Manual/BCT15XKeySafeMode.html (1 of 4)5/26/2009 11:16:19 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm