Edit Group
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
When you create a new channel group, the scanner automatically assigns a default name
of Group XX, where XX is a 2-digit sequential number (1 through 20).
● Options available for all groups:
❍ Edit Name
❍ Set Quick Key
❍ Edit Channel
❍ Set LocationInfo
❍ Set Lockout
❍ Delete Group
❍ New Group
Options available for all groups:
You have the following options for channel groups:
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they can
contain upper and lower case letters, punctuation, and spaces. Turn the SELECT-
VOLUME-SQUELCH knob on the handheld scanners or the SCROLL / FUNCTION
knob on mobile scanners to choose the character you want, then press 6 (right cursor) to
move the cursor to the next character.
Set Quick Key
Assign this group to a Quick Key so you can easily enable or disable it during scanning.
Enter a number from 0 to 9; tap NO (the decimal point) if you don't want to assign this
group to a Quick Key. (For more information, see Quick Keys.)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/EditGroup.html (1 of 2)5/26/2009 11:14:44 AM
To Next Page
Loading...
