Search with Scan
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
● Set Quick Key
● Set Startup Key
● Set Number Tag
● Set Lockout
● Set Hold Time
Set Quick Key
Assign this search range to a Quick Key so you can easily enable or disable it during
scanning. Enter a number from 0 to 99; tap NO (the decimal point) if you don't want to
assign this search range to a Quick Key. (For more information, see Quick Keys.)
Set Startup Key
Assign this search range to a Startup Key so you can lock or unlock it during power up.
Enter a number from 0 to 9; tap NO (the decimal point) if you don't want to assign this
search range to a Startup Key. (For more information, see Startup Keys.)
Set Number Tag
Assign a number to this search range that you can use to quickly access the first
frequency of the the search range. Choose a number from 0 to 999. (For more
information, see Number Tags.)
Set Lockout
Decide whether you want to lock out the search so the scanner will ignore it during Scan
and Search modes. Choose one of the following options:
● Unlocked: The search range is included while scanning.
● Temporary L/O: The search range is locked out until you turn the scanner off and
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ents/temp/CDImage_090515/Manual/SearchWithScan.html (1 of 2)5/26/2009 11:16:01 AM
To Next Page
Loading...
