Uniden BCD396XT User Manual

NumberTags < UnidenMan4 < TWiki
To navigate
directly to:
Key Sequence Example
A system or search
range
1. Tap HOLD.
2. Enter the SNT + •.
3. Tap MENU.
If the SNT is 4 , enter
HOLD / 4 / • /
MENU.
A channel in the
current system
1. Tap HOLD.
2. Enter the CHNT.
3. Tap MENU.
If the CHNT is 27,
enter HOLD / 27 /
MENU.
A channel in a
different system
1. Tap HOLD.
2. Enter the SNT followed by the
decimal point.
3. Enter the CHNT.
4. Tap MENU.
If the SNT is 4 and
the CHNT is 27,
enter HOLD / 4 / • /
27 / MENU.
Notes:
● If two systems have the same SNT, they will be selected in sequence (i.e. the first
time you select the SNT, the scanner will go to the first system assigned with that
SNT; if you select the same SNT again, it will go to the 2nd system assigned with
that SNT, and so on).
● If two channels in the same system have the same CHNT, they will be selected in
sequence (i.e. the first time you select the CHNT, the scanner will go to the first
channel in that system assigned with that CHNT; if you select the same CHNT
again, it will go to the 2nd channel assigned with that CHNT, and so on).
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/NumberTags.html (3 of 3)5/26/2009 11:12:33 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm