Function
+ Tap
NA Go to the menu mode to
edit the current location.
NA Temporary lockout the
current location alert if
one is active.
Switch between GPS
display modes.
Key
Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCROLL - FUNCTION
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
Select a POI. NA NA
Tap NA Change backlight level. Activate the FUNCTION
mode for the next keypress.
Return to previous
operation.
Hold on the current
channel.
Press &
Hold
NA NA "Latch" the FUNCTION
mode. Scanner stays on the
current system and all
keypresses use the
FUNCTION mode until you
tap the control again.
NA Hold on the current
system.
If already holding on a
system, resume normal
scanning when in scan
mode.
Function
+ Rotate
NA NA Quickly skip to the location
starting with the next
alphabetic character.
Return to previous
operation.
NA
This page applies to the following scanner(s): BCD996XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20...ts/temp/CDImage_090515/Manual/BCD996XTGPSMode.html (5 of 5)5/26/2009 11:12:47 AM
To Next Page
Loading...
