● Negative Channel Dropout Delay (Forced Resume
● Adjustable Hold (scan duration 0-255 sec) per system, custom or service search
● Strong signal attenuation
● Upgradeable firmware
● Channel Alert
● Independent Alert Tone Volume - lets you set the volume level of the following
tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert.
● Repeater Reverse
● Broadcast signal ignore while searching (TV and radio station frequencies,
pagers, etc)
● Quick Recall - quickly navigates to a specific Channel by choosing the System,
Group, and Channel.
● DIN-E and ISO Vehicle Mountable (DIN-E sleeve not included optional)
● Reversible Display - Lets you reverse the display to mount unit upside down (and
hear the speaker from the top)
● Record Out - you can connect an output jack to a VOX controlled recorder or PC
sound input to record the received audio.
● Duplicate Channel Alert
● PC Programming and Control
● Wired Cloning
● Power requirements: 11.0V to 16.6V DC
● Antenna Connector: BNC
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ents/temp/CDImage_090515/Manual/BCT15XFeatures.html (3 of 3)5/26/2009 11:12:48 AM
To Next Page
Loading...
