Thursday, May 14, 2009
Set CC Bands
This setting controls the band filtering used during Close Call operation.
You can turn on or off the following bands.
VHF Low 1 : On/Off : 25.0000 - 53.9800 MHz
VHF Low 2 : On/Off : 54.0000 - 107.9000 MHz
Air Band : On/Off : 108.0000 - 136.9916 MHz
VHF High 1 : On/Off : 137.0000 - 224.9800 MHz
VHF High 2 : On/Off : 225.0000 - 319.9500 MHz
UHF : On/Off : 320.0000 - 512.0000 MHz
800MHz+ : On/Off : 758.0000 - 787.9937 MHz
788.0000 - 823.9875 MHz
849.0125 - 868.9875 MHz
894.0125 - 960.0000 MHz
1240.0000 - 1300.0000 MHz
Turn [Scroll Control] to move the cursor, and press [E / yes / gps] to change the setting.
On The scanner check Close Call in this Band.
Off The scanner does not check this Band.
Press [Menu] to return to the previous menu.
To Next Page
Loading...
