Uniden BCD396XT - Page 366

Thursday, May 14, 2009
117
ID Display Format
The scanner displays received ID in the following format on the second line.
Normal ID
The scanner displays as "ID:xxxx" for no-named TGID.
Example) MOT Type I ID : ID:101-1
MOT Type II : ID:12345 (Decimal Format)
: ID:123 h (Hexadecimal Format)
P25 ID : ID:12345 (Decimal Format)
: ID:1234h (Hexadecimal Format)
EDACS : ID:01-023 (AFS Format)
: ID:147 (Decimal Format)
LTR : ID:0-20-254
I-Call
The scanner displays ID as "ID:xxxxxx" for no-named TGID. In order to show that ID is I-Call, "i" is displayed
on the left end of the ID.
Example) MOT Type I I-Call : ID:i12345
MOT Type II : ID:i12345 (Decimal Format)
: ID:i1234h (Hexadecimal Format)
P25 I-Call : ID:i12345678 (Decimal Format)
: ID:i123456h (Hexadecimal Format)
EDACS I-Call : ID:i12345
I-Call wild card (i0)
The scanner will display the received I-Call for wild card.
Example) I-Call wild card : ID:i0 (while scanning)
ID:i123456 (when it receives a ID)
MOT Individual Call
The scanner displays both IDs under communication as "ID:xxxxxx-yyyyyy".
In order to show that IDs are Individual Call, "i" is displayed on the left end of IDs.
Example)
MOT Type I Individual Call : ID:i12345-i23456
MOT Type II : ID:i12345-i23456 (Decimal Format)
: ID:i1234h-i2345h (Hexadecimal Format)
P25 Individual Call : ID:i12345678 SRC
ID:i23456789 DST (Decimal Format)
: ID:i123456h SRC
: ID:i234567h DST (Hexadecimal Format)
*If the left side ID is already named, the scanner only displays that ID’s name.
*The scanner alternately displays ID:XXXXXXXX SRC(or ID:XXXXXXh SRC) and ID:YYYYYYYY DST(or
ID:YYYYYYh DST) during a P25 individual call.