Uniden BCD396XT - Page 478

229
, ← [L3_MODE]
Srch/CloCall Opt, ← [L4_CHAR]
, ← [L4_MODE]
1,0,0,0,,,0,GREEN,,[\r]
Returns current scanner status.
Ex.2) ┌----------------┐
｜ HOLD L/O |
│System 1 ｜ Squelch Status : CLOSE
│ 851.0125MHz | Mute Status : ON
│ P NFM ATT | Battery Low Status : No Alert
│S1: 5 | Weather Alert Status : Alert
｜GRP 2 WX |
└----------------┘
→ STS[\r]
← 011000,
HOLD L/O , ← [L1_CHAR]
, ← [L1_MODE]
SYSTEM 1 , ← [L2_CHAR]
, ← [L2_MODE]
851.0125MHz , ← [L3_CHAR]
, ← [L3_MODE]
P NFM ATT , ← [L4_CHAR]
, ← [L4_MODE]
S1: 5 , ← [L5_CHAR]
, ← [L5_MODE]
GRP 2 WX, ← [L6_CHAR]
, ← [L6_MODE]
0,1,0,0,,,1,GREEN,,[\r]
Returns current scanner status.
<COMMAND GLG>
Get Reception Status
Controller → Radio
GLG[\r]
Radio → Controller
GLG,[FRQ/TGID],[MOD],[ATT],[CTCSS/DCS],[NAME1],[NAME2],[NAME3],[SQL],[MUT],
[SYS_TAG],[CHAN_TAG],[P25NAC][\r]
GLG,,,,,,,,,,[\r]
[FRQ/TGID] : Frequency or TGID
[MOD] : Modulation (AM/FM/NFM/WFM/FMB)
[ATT] : Attenuation (0:OFF / 1:ON)
[CTCSS/DCS] : CTCSS/DCS Status (0-231)
*See CTCSS/DCS CODE LIST about the details of this code.
[NAME1] : System, Site or Search Name
[NAME2] : Group Name
[NAME3] : Channel Name
[SQL] : Squelch Status (0:CLOSE / 1:OPEN)
[MUT] : Mute Status (0:OFF / 1:ON)