Uniden BCD396XT - Page 498

249
<COMMAND FWD>
Get Fwd Index
Controller → Radio
FWD,[INDEX][\r]
Radio → Controller
FWD,[INDEX][\r]
[INDEX] : Index of system, site, group, channel, TGID or
Location Alert System.
Returns forward index of the index in the memory chain.
Returns -1 if no more index exists.
This command is only acceptable in Programming Mode.
<COMMAND RMB>
Get Remains of Memory Block
Controller → Radio
RMB[\r]
Radio → Controller
RMB,#####[\r]
Returns the number of idle(free) memory block.
: ##### (not zero-padding)
This command is only acceptable in Programming Mode.
<COMMAND MEM>
Get Memory Used
Controller → Radio
MEM[\r]
Radio → Controller
MEM,[MEMORY_USED],[SYS],[SITE],[CHN],[LOC][\r]
[MEMORY_USED] : The percent of memory that is used (0 - 100)
[SYS] : The number of systems that is created (0 – 500)
[SITE] : The number of sites that is created (0 - 1000)
[CHN] : The number of channels that is created (0 – 25000)
[LOC] : The number of location system that is created (0 – 1000)
This command is only acceptable in Programming Mode.
<COMMAND LIH>
Get Location Alert System Index Head
Controller → Radio
LIH,[LAS_TYPE][\r]
Radio → Controller
LIH,[INDEX][\r]
[LAS_TYPE] : Location Alert Type
(POI:POI / DROAD:Dangerous Road / DXING :Dangerous Xing)
Returns the first index of stored location alert system list.
This command is only acceptable in Programming Mode.