Uniden BCD396XT - Page 539

CloseCallMode < UnidenMan4 < TWiki
Tap When the
scanner detects a
Close Call hit:
Enter Hold
mode.
Disable the Close Call band associated with this key.
Tap again to enable.
FUNCTION
+ Tap
Toggle Close
Call mode.
Start the search assigned to this Search Key.
Key Name
(2nd
operation)
Action on:
Scan (Search)
4 (IF exchange)
5 (Volume
offset)
6 (Display
mode)
Tap Enter Scan
mode.
Disable the Close Call band associated with this key.
Tap again to enable.
FUNCTION
+ Tap
Display the
Quick Search
screen (enter
Search mode).
Switch to the
intermediate
frequency (IF).
NA NA
Key Name
(2nd
operation)
Action on:
Lockout
7 (Attenuation)
8 (Reverse
freq.)
9 (Modulation)
Tap Temporarily lock
out the current
Close Call
frequency (until
you turn the
scanner off).
Disable the
Close Call band
associated with
this key. Tap
again to enable.
NA NA
Double tap Permanently lock
out the current
Close Call
frequency.
NA NA NA
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ments/temp/CDImage_090515/Manual/CloseCallMode.html (2 of 4)5/26/2009 11:13:56 AM