Uniden BCD396XT - Page 545

BandScopeMode < UnidenMan4 < TWiki
Tap Press this key to
close the setting
screen and return
to the Normal
Screen.
NA NA NA
FUNCTION
+ Tap
Press this key to
restart searching.
Toggle the
attenuator state
for the current
signal.
NA Change the
modulation.
FUNCTION
+ Press &
hold
NA Toggle the
attenuator state
for all signals.
NA NA
Key Name
(2nd
operation)
Action on:
Backlight
(Power, Lock)
No (Decimal,
Priority)
0 (Weather)
Yes (Enter,
GPS)
Tap Turn on the LCD
backlight.
Press this key to
select the next
setting item.
NA NA
Press & hold Turn the scanner
on or off.
NA NA NA
FUNCTION
+ Tap
Lock or unlock
the keypad.
NA Change the
Weather Alert
Priority settings.
Enter GPS mode.
FUNCTION
+ Press &
hold
NA NA Enter Weather
mode.
NA
This page applies to the following scanner(s): BCD396XT BC346XT
UsersGuide
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ments/temp/CDImage_090515/Manual/BandScopeMode.html (4 of 4)5/26/2009 11:13:58 AM