Uniden BCD396XT - Page 809

251
<COMMAND DBC>
Get/Set Default Band Coverage Settings
Controller → Radio
DBC,[BNAD_NO][\r]
DBC,[BNAD_NO],[STEP],[MOD][\r]
Radio → Controller
DBC, [STEP],[MOD] [\r]
DBC,OK[\r]
[BAND_NO] : Band No (1-31)
Band number of band coverage
[STP] : Search Step
500 : 5k 625 : 6.25k 750 : 7.5 k
833 : 8.33k 1000 : 10k 1250 : 12.5k
1500 : 15k 2000 : 20k 2500 : 25k
5000 : 50k 10000 : 100k
[MOD] : Modulation (AM / NFM / FM / WFM / FMB)
This command is only acceptable in Programming Mode.
<COMMAND GDO>
Get/Set GPS Disp Option
Controller → Radio
GDO[\r]
GDO,[DISP_MODE],[UNIT],[TIME_FORMAT],[TIME_ZONE],[POS_FORMAT][\r]
Radio → Controller
GDO,[DISP_MODE],[UNIT],[TIME_FORMAT],[TIME_ZONE],[POS_FORMAT][\r]
GDO,OK[\r]
[DISP_MODE] : Display GPS Mode
( 0:ETA / 1:Clock / 2:Elevation / 3:Speed / 4:Location )
[UNIT] : Distance Unit ( 0: mile / 1: km )
[TIME_FORMAT]: Time Format ( 0: 12 H / 1: 24H)
[TIME_ZONE] : Time Zone (-14.0/-13.5/.../-0.5/0.0/0.5/.../13.5/14.0)
ex) “-14.0” means “- 14.0 H”.
[POS_FORMAT]: Position Format ( DMS / DEG )
This command is only acceptable in Programming Mode.