Uniden BCD396XT - Page 845

SetLocationInfo < UnidenMan4 < TWiki
Set GPS Enable
(A GPS unit must be connected)
Turn this feature on if you want the scanner to lock out this site or channel group when
you leave the range and enable the site or channel group when you are within the range.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ents/temp/CDImage_090515/Manual/SetLocationInfo.html (2 of 2)5/26/2009 11:14:44 AM