Uniden BCD396XT - Page 928

CloseCall < UnidenMan4 < TWiki
Choose how long you want the scanner to pause on a close call hit before going back to
its previous operation; this setting only applies when the Set CC Override feature is
turned off. Choose a pause time of 3, 5, 10, 15, 30, 45, or 60 seconds. If you want the
scanner to wait for your input whenever it detects a close call hit, select Infinite.
Set CC Bands
Choose whether you want the scanner to search for close call hits on the frequency bands
listed below. Select each band you want to search, then press YES to turn that band On .
The scanner only searches for close call hits on bands that are turned on.
Band BCD396XT and
BCD996XT
frequencies
BC346XT
frequencies
BCT15X
frequencies
VHF Low
1
25.0000–53.9800
MHz
25.0000–53.9800
MHz
25.0000-53.9800
MHz
VHF Low
2
54.0000–107.9000
MHz
54.0000–107.9000
MHz
54.0000-107.9000
MHz
Air Band 108.0000–136.9916
MHz
108.0000–136.9916
MHz
108.0000-136.9916
MHz
VHF High
1
137.0000–224.9800
MHz
137.0000–224.9800
MHz
137.0000-224.9800
MHz
VHF High
2
225.0000–319.9500
MHz
Not available 225.0000-319.9500
MHz
UHF 320.0000–512.0000
MHz
400.0000–512.0000
MHz
320.0000-512.0000
MHz
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/CloseCall.html (4 of 5)5/26/2009 11:15:49 AM