VOLUME-SQUELCH knob on the handheld scanners or the SCROLL / FUNCTION
knob on mobile scanners to choose the character you want, then press 6 (right cursor) to
move the cursor to the next character.
Set Type
When you create a location, the location is created as the type you are currently viewing
(POI, Dangerous Xing, or Dangerous Road). If you want to change the location type,
you can select the new location type here.
When you change the location type, the scanner goes back to the Program Location
menu. Select the new location type to edit this location; the scanner resets the available
options based on the new location type.
Set Alert
This menu lets you configure whether the scanner triggers an alert tone and light when
you approach this location.
Set Alert Light
This setting is exactly the same as its counterpart on the system, site, and channel menus.
Click on the setting for a complete explanation.
Set Alert Tone
Choose one of the available alert tones for this POI:
● Alert 1 :
1047 Hz for 125 ms / Silence for 50 ms / 1047 Hz for 125 ms / Silence for
50 ms / 1319 Hz for 125 ms / Silence for 50 ms / 1568 Hz for 125 ms /
Silence for 175 ms / 1319 Hz for 125 ms / Silence for 50 ms / 1568 Hz for
125 ms
● Alert 2 :
1047 Hz for 200 ms / Silence for 200 ms / 1760 Hz for 250 ms / Silence
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ents/temp/CDImage_090515/Manual/ProgramLocation.html (2 of 6)5/26/2009 11:15:53 AM
To Next Page
Loading...
