Set Record (BCD996XT and BCT15X Only)
Turn this setting on to have the audio from received tone-outs included on the rear
RECORD OUT jack.
Tone-Out Search
You can set the scanner to search for and identify the tones used in tone-outs. To do so,
you set both the A and B tones to a value of "0". See Tone A and Tone B Settings for
more information.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XTUsers Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/ToneOutFor.html (3 of 3)5/26/2009 11:16:05 AM
To Next Page
