4
1 Outline
4
Outline
Chapter
1
<When indicated values are displayed>
Equivalent input calibration mode is on.
<When setting is performed>
This key selects set items and decreases one value of the flashing digit of a setting
value.
<When indicated values are displayed>
Zero calibration mode is on (when calibration LOCK is OFF).
Indicated value is forced to be zero by digital zero (when calibration LOCK is ON).
* If setting value of ZERO key valid/invalid is set as invalid and key operation is not
possible.
<When setting is performed>
This key selects a setting mode and the flashing digit of a setting value.
<When indicated values are displayed>
This key is used for hold function operation.
Operations change depending on setting values of hold fix section.
* If setting value of HOLD key valid/invalid is set as invalid, key operation is not
possible.
<When setting is performed>
The key fixes set items and setting values.
Caution
● Do not press strongly nor use sharp objects to press the switch.
This may cause damage and malfunction.
0: OFF
1: ON
When hold fix section is
Button down First time:
Second time:
First time:
Second time:
Third time:
Button down
Hold operation starts
Hold operation is canceled
Hold operation starts
Hold is fixed
Hold operation is canceled
To Next Page
Loading...
Need help?
General
