User's Guide _______________________________________________________________________
154 __________________________________________________________________ M211107EN-C
Internal Monitoring
Extensive built-in tests are included in the FS11P operation. Various
voltages are measured, and corresponding alarm and warning limits are
checked.
The FS11P sensor generates a warning if some monitored value does not
meet the criteria for optimal operation, but the measurement results are
still reliable. For example, slightly contaminated windows or aging
transmitter LEDs generate warnings. If a critical hardware failure is
detected, the sensor indicates an alarm and the corresponding data is set
as missing (/////).
Built-in tests include contamination monitoring, signal monitoring,
hardware monitoring, and memory tests. The results of the monitoring
are displayed in the status message.
FS11P Status Messages
The status messages display the results of the built-in test system. A short
status check message shows a quick report of the system status. The short
status message is requested with the command STATUS CHECK:
0> status check
FS11P SYSTEM STATUS: OK
Measurement unit: OK
Current Events:
NONE.
Interface unit: OK
Current Events:
Conf2:VIS+ALS measurement
Background luminance sensor: OK
Current Events:
NONE.
Present Weather Detector: OK
To Next Page
Loading...
