Vaisala FS11P - Unloading and Unpacking; Unpacking Procedure; Storage Information

Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 27
Unloading and Unpacking
The contents of the delivery in question are specified in the packing list
included in the delivery documents. The FS11P equipment is normally
delivered in four cases containing the following parts:
- Measurement unit FSM102 (and optional FSA11)
- Interface unit FSI102 with radiation shield (and optional Sensor Arm
LM21)
- Frangible Pole Mast (Foundation Kit packed with FSM102)
- PWD32 Precipitation Identifier (and optional PWA12)
- FSB101 Backup Battery (optional)
The cases can be easily moved from the truck to the installation site by
two persons.
NOTE
The case containing the optical parts should be handled carefully. Do
not drop either end of the case for more than five centimeters.
Unpacking Procedure
1. Read the packing list supplied with the delivery documents.
Compare the packing list with the purchase order to ensure that the
shipment is complete.
2. Open the covers.
3. In case of any discrepancies or damage, contact the supplier.
4. Place the packing materials and covers back in the cases and store
them for possible reshipment.
Storage Information
Store FS11P in its packages in dry conditions, not in the open air. The
storage conditions are the following:
- Temperature -50 °C to 70 °C
- Relative humidity lower than 95%
NOTE
If the FS11P system contains a battery
backup option, make sure that the
battery
is charged full if the unit is stored in an extremely cold
environment.